Category Archives: CNC/3D-printing

Business card embosser

Posted on August 27, 2020 by robertwilkie

Interesting build, basically you 3D print your design, then roll a business card thru it to make an indention design on the paper. https://www.instructables.com/id/The-Business-Card-Embosser-System/

Posted in Cheap, CNC/3D-printing, Misc-Life | Comments Off on Business card embosser

Nice lamp build from plywood

Posted on August 26, 2020 by robertwilkie

Nice build, the author uses a combo of handtools and CNC to make this. https://www.instructables.com/id/Mid-Century-Flexible-Plywood-Lamp/

Posted in Cheap, CNC/3D-printing, Misc-Life, woodworking | Comments Off on Nice lamp build from plywood

Cool CNC build from CD ROM drives

Posted on August 18, 2020 by robertwilkie

Most builds I see are stationary, this is nice since you can move it to draw on different mediums. I have seem another build like this before. Just not with a nice write up and video https://www.instructables.com/id/DIY-Arduino-Based-Mini-CNC-Machine-New-Design/

Posted in Arduino, Cheap, CNC/3D-printing, Misc-Life | Comments Off on Cool CNC build from CD ROM drives

Another interesting face mask build

Posted on August 13, 2020 by robertwilkie

Since the masks seem to be more for protecting everyone else from you. This is an interesting build where it “cleans” the air you breath in from the mask with a UVC LED. Only issue is I know UVC can … Continue reading →

Posted in Cheap, CNC/3D-printing, Misc-Life | Comments Off on Another interesting face mask build

Interesting powered respirator build

Posted on August 3, 2020 by robertwilkie

Nice build, the author uses a fan to push the air thru the HEPA filters. Me…I am leery of using a 3D printer for the case, not so sure how air tight it would be. https://www.instructables.com/id/3D-Print-Powered-Respirator-for-Front-Line-Covid-1/

Posted in Cheap, CNC/3D-printing, Misc-Life | Comments Off on Interesting powered respirator build

Nice desk from CNC material

Posted on July 31, 2020 by robertwilkie

This is a pretty nice looking desk. The author CNC’ed out all the parts and slowly put it all together. https://www.instructables.com/id/Plywood-Desk-for-Double-Home-Office/

Posted in Cheap, CNC/3D-printing, Misc-Life | Comments Off on Nice desk from CNC material

3D printed holders for drawer organizers

Posted on July 28, 2020 by robertwilkie

Basically the author made “holders for the ends and corners of arcrylic sheets to act as separators for a drawer. Good idea. https://www.instructables.com/id/3D-Print-Drawer-Organizer/

Posted in Cheap, CNC/3D-printing, Misc-Life | Comments Off on 3D printed holders for drawer organizers

On the trend of 3D printed masks

Posted on July 17, 2020 by robertwilkie

OK found another one. This one looks a bit easier to print out. https://www.instructables.com/id/N95-Sealed-Face-Mask-3D-Printed-BaileyMask/

Posted in Cheap, CNC/3D-printing, Misc-Life | Comments Off on On the trend of 3D printed masks

Another 3D printed respirator

Posted on July 16, 2020 by robertwilkie

Haven’t shown another one of these in a bit. This is another nice build which you can use parts of a N95 mask to be the filter in this one. Me…masks seem to be easier to come by these days … Continue reading →

Posted in Cheap, CNC/3D-printing, Misc-Life | Comments Off on Another 3D printed respirator

3D print your own Cyclone Dust Collector

Posted on July 8, 2020 by robertwilkie

I can’t imagine how long it took to 3D print this out. But it is impressive. https://www.instructables.com/id/Cyclone-Dust-Collector-by-3D-Printer/

Posted in CNC/3D-printing, Misc-Life | Comments Off on 3D print your own Cyclone Dust Collector