-
Recent Posts
Recent Comments
Archives
- January 2024
- October 2023
- September 2023
- August 2023
- June 2023
- May 2023
- April 2023
- March 2023
- February 2023
- January 2023
- December 2022
- November 2022
- October 2022
- September 2022
- August 2022
- April 2022
- March 2022
- February 2022
- January 2022
- December 2021
- November 2021
- October 2021
- September 2021
- August 2021
- July 2021
- June 2021
- May 2021
- April 2021
- March 2021
- February 2021
- January 2021
- December 2020
- November 2020
- October 2020
- September 2020
- August 2020
- July 2020
- June 2020
- May 2020
- April 2020
- March 2020
- February 2020
- January 2020
- December 2019
- November 2019
- October 2019
- September 2019
- August 2019
- July 2019
- June 2019
- May 2019
- April 2019
- March 2019
- February 2019
- January 2019
- December 2018
- November 2018
- October 2018
- September 2018
- August 2018
- July 2018
- June 2018
- May 2018
- April 2018
- March 2018
- February 2018
- January 2018
- December 2017
- November 2017
- October 2017
- September 2017
- August 2017
- July 2017
- June 2017
- May 2017
- April 2017
- March 2017
- February 2017
- January 2017
- December 2016
- November 2016
- October 2016
- September 2016
- August 2016
- July 2016
- June 2016
- May 2016
- April 2016
- March 2016
- February 2016
- January 2016
- December 2015
- November 2015
- October 2015
- September 2015
- August 2015
- July 2015
- June 2015
- May 2015
- April 2015
- March 2015
- February 2015
- January 2015
- December 2014
- November 2014
- October 2014
- September 2014
- August 2014
- July 2014
- June 2014
- May 2014
- April 2014
- March 2014
- February 2014
- January 2014
- December 2013
- November 2013
- October 2013
- September 2013
- August 2013
- July 2013
- June 2013
- May 2013
- April 2013
- March 2013
- February 2013
- January 2013
- December 2012
- November 2012
- October 2012
- September 2012
- August 2012
- July 2012
- June 2012
- May 2012
- April 2012
Meta
Monthly Archives: June 2015
Autopilot R/C boat
Interesting build where the author built an his own autopilot based boat. Using homebuilt arduinos and GPS. Pretty interesting build. http://hackaday.com/2015/06/01/simple-autonomy-with-an-rc-boat/
Author uses one homemade CNC to make a better one
Its an impressive build, but….I can’t find the plans/design drawings on the thread the author posted this under. http://hackaday.com/2015/06/07/diy-mdf-cnc-machine-is-small-and-solid/
Posted in Cheap, CNC/3D-printing
Comments Off on Author uses one homemade CNC to make a better one
So how much meds are you going to give yourself?
Article covers how medical pumps (embedded systems) has a flaw in them that could allow hackers to trigger the pumps to do more or less of a drug. I can just see it now, folks admitted to hospitals now OD’ing … Continue reading
Posted in Printer Security, Security
Comments Off on So how much meds are you going to give yourself?
build an LED plank light
This has to be a pretty simple build to do, attached the LED stripe around a smaller board edge, then sandwich it with 2 bigger boards. Looks cool. http://www.instructables.com/id/LED-Plank-Light/
Build a paracord knitting tool
Pretty simple build. Not so sure why he used cotter pins (at a $1.5 each) over something like bolts or nails. But good build if you plan to make long paracord strands. http://www.instructables.com/id/Paracord-4-Peg-Spool-Knitting/
Convert a bike frame into a scion light
Clever idea, I think you could do this with any frame, and you could switch it around to have a light with shade on top, and run the wire through the frame to hide it. http://www.instructables.com/id/Bicycle-Frame-Lamp-1/
Make your own chalkboard paint
I have a large area I want to put chalkboard paint on, its going to need at least 2 quarts, and at $25 each…that s $50…way too much. So I stumbled on this article that basically says to mix in … Continue reading
Use an RPi as a wireless print server
Good article on how to setup a Raspberry Pi as a print server. This is a good way to improve security of the printer (potentially) as well. Down side. You would be surprised how many printers out there cannot interact … Continue reading
Posted in Cheap, Misc-Life, Printer Security, RaspberryPi
Comments Off on Use an RPi as a wireless print server
Share files with devices over Bluetooth
Surprisingly I have not done this myself. I typically tether the phone to the PC to transfer files. But this could be allot easier to do, if you have a bluetooth receiver on the computer. http://www.howtogeek.com/208365/how-to-use-bluetooth-file-transfer-between-os-x-and-android-5.0-devices/
Program your arduino with an Android device
Basically this is making use of one of two apps, ArduinoDroid or ArduinoCommander. I was thinking this would be a good add if you have arduinos located in tough locations and use your phone to re-program them. Instead of dragging … Continue reading